Find the pressure
Divide applied force by the input piston area.
Choose piston areas and applied force to lift a load with conserved ideal work.
Grades 4 to 5 · Physics
Your goal
Use 1 cm² input and 4 cm² output pistons with 5 N applied force to lift 20 N through 5.00 cm. Push the input piston 20 cm.
Reduced motion is on. The controls still update the scene.
Ready to push. Equal pressure 5.0 N/cm². Available output force 20 N. Travel: input 0.00 cm, output 0.00 cm. Ideal input and output work both 0.00 J.
Ideal incompressible fluid, no leaks, friction or piston weight; pressure differences from height are neglected. A full stroke is possible only if available output force supports the load. Equal force is the slow lift threshold. Work shown uses available output force; if force exceeds load weight, the surplus can accelerate the load. Force multiplication gives less output travel, never free energy.
Hydraulic Lift Workshop helps children investigate how a small piston can support a heavy load through connected fluid. Choose both piston areas, set the applied force and input stroke, then push the input piston. Compare the equal pressure on both sides with the different forces each area produces. The travel readings reveal the trade: a larger output piston moves a shorter distance. Try a force that is too small, then adjust the design. Matching input and output work shows why a hydraulic lift cannot create free energy.
Divide applied force by the input piston area.
The same fluid pressure acts over the larger output area.
Output force rises as output travel falls; ideal work stays equal.
Discover equal pressure, force multiplication and reciprocal piston travel. Ask students to predict what will happen, change one setting, and explain what they observe. Learn gives a starting point. Practice and Challenge offer new goals with the same scene.
Ideal incompressible fluid with no leaks, friction or piston weight; work uses available output force.